Setting up and configuring LAN in a Computer Lab as peer to peer network

Setting up and configuring LAN in a Computer Lab as peer to peer network iti

🌐 Setting Up and Configuring LAN in a Computer Lab as Peer-to-Peer Network

A Local Area Network (LAN) is a network of computers and devices that are connected within a relatively small area, like a computer lab. In a peer-to-peer (P2P) network, all devices are considered equal and share resources without requiring a central server. This guide will walk you through setting up a LAN in a computer lab using a peer-to-peer configuration.

🎯 What is a Peer-to-Peer Network?

A Peer-to-Peer (P2P) network is a decentralized network architecture where each computer (or "peer") can act as both a client and a server. In this type of network, all connected devices can share resources like files, printers, and applications directly with one another without the need for a central server.

Advantages of Peer-to-Peer Networks:

  • No need for a dedicated server, which reduces costs.
  • Each computer has equal control over its resources.
  • Simple to set up and configure.
  • Suitable for small networks like those in computer labs or home setups.

🎯 Requirements for Setting Up LAN in a Computer Lab

To set up a peer-to-peer network in a computer lab, the following hardware and software are required:

  • Computers: A set of computers with network interface cards (NICs) installed.
  • Network Cables: Ethernet cables (Cat5e, Cat6) to connect the computers.
  • Switch/Hub: A hub or switch to connect the computers together in the LAN.
  • Router (Optional): If internet access is needed for the lab, a router will be required for connection to the internet.
  • Operating System: Windows, Linux, or macOS. In this example, we will use Windows OS for configuration.

🎯 Steps to Set Up and Configure the Peer-to-Peer LAN

Step 1: Physical Setup

  • Ensure that each computer is properly powered on and connected to the hub/switch using Ethernet cables.
  • If you are using a router for internet access, connect the router to the switch or hub.
  • Ensure all devices are connected to the same switch or hub to form the LAN.

Step 2: Assigning IP Addresses

In a peer-to-peer network, devices need unique IP addresses to communicate with each other. Here, we will assign static IP addresses to each computer in the network.

  • Open Control Panel on each computer.
  • Go to Network and Sharing Center and click on Change adapter settings.
  • Right-click on the network connection (Ethernet) and select Properties.
  • Select Internet Protocol Version 4 (TCP/IPv4) and click on Properties.
  • Select Use the following IP address and enter the following details for each computer:
    • IP Address: Assign a unique address for each device (e.g., 192.168.1.2, 192.168.1.3, etc.).
    • Subnet Mask: Use the default subnet mask 255.255.255.0 for a simple home network.
    • Default Gateway: If connected to a router for internet access, enter the router's IP address (e.g., 192.168.1.1).
  • Click OK to apply the settings and repeat the process for each computer.

Step 3: Enabling File and Printer Sharing

Once the IP addresses are assigned, enable file and printer sharing to allow computers to communicate and share resources.

  • Go to the Network and Sharing Center in the Control Panel.
  • Click on Change advanced sharing settings on the left sidebar.
  • Under Private, enable the following options:
    • Turn on network discovery
    • Turn on file and printer sharing
    • Allow Windows to manage homegroup connections (if using Homegroup feature).
  • Click Save changes to apply the settings.

Step 4: Sharing Files and Folders

Now, you can share files and folders between computers in the network.

  • Right-click the folder you want to share and select Properties.
  • Click on the Sharing tab and then click Advanced Sharing.
  • Check the box for Share this folder, and you can also set permissions if needed.
  • Click OK to save the changes.

Step 5: Accessing Shared Files

Once files are shared, they can be accessed by other computers in the network.

  • Open File Explorer and click on Network in the left sidebar.
  • You will see all the computers connected to the network. Double-click on a computer to access shared files and folders.

Step 6: Testing the Network

Finally, test the connectivity between computers by using the ping command to ensure that they can communicate.

  • Open the Command Prompt (Windows + R, type cmd, and hit Enter).
  • Type ping 192.168.1.2 (or the IP address of another computer) and press Enter.
  • If the connection is successful, you will see reply messages from the other computer.
  • If there are issues, check the IP configurations and ensure that all computers are connected to the same network.

🎯 Troubleshooting Tips

  • Ensure all network cables are properly connected and that the hub/switch is functioning.
  • Check the firewall settings on each computer to make sure it is not blocking the network communication.
  • If the ping command fails, verify the IP address and subnet mask settings.
  • If the computers are not showing up in the network, restart the network devices and try again.

🎯 Summary

Setting up a Peer-to-Peer (P2P) network in a computer lab is simple and cost-effective. By configuring the IP addresses, enabling file sharing, and ensuring all computers are connected to the same network, you can quickly establish a functional LAN where devices can share files and resources. Troubleshooting is easy and mainly involves checking the IP configurations and network connections.